Capabilities

Manufacturing Capabilities:

	Engineering Technology: Solid Works v 2008, AutoCAD Mechanical 2004, Sigma Nest 8., Gibbs 2008
	Tube and Pipe Bending:CNC Tube benders bends up to 3.00” diameter and 2.00” inches rectangle, CNC muti-head bending system that processes cut tubing into ready to weld wire carrier components.
	Profile Roll:Powerfull, Hydraulic Double Initial Pinch CPHV-70 Flats Hard 2-3/4", Pipe Schedule 40 2.00", Angle 2-1/2", Operates both Horizontal AND Vertical
	Laser Cutting: LVD, 2000 watt power for material up to .50” X 48.00” X 96.0
	Robotic Welders: 2004 Lincoln and 2005 OTC
	Plasma/Oxy CNC cutting: ESAB 200 Amp Plasma cuts up to 1-1/2” plasma and oxy fuel up to 6 inches, 12.0’ X 24.0’ bed.
	High Speed CNC Tube Cut-Off Saw: Material up to 25.0’ long. Programs to cut two different lengths in same piece of tubing 2002 model machine. Fully automatic re-cut machine, Semi-automatic Hyd-Mech Band saws capable of miters from 5/8" to 12" rounds and squares
	Ironworker: 2004 120 ton Piranha Iron Worker
	Pyramid plate rolling:Eagle plate bender rolls cylinders and arcs 10.00” in diameter on up 10 foot at a width of 8.0ft X 0.375” thickness.
	Bending: 250 ton AccuPress CNC Press Break on a 12 foot bed with sectional dies & 200 tons HTC Manual Press on a 12.0’ bed.
	Certified Welders: Meet all requirements of AWS D1.1 Structural Steel Code for welders in MIG, Stick, TIG, & Flux.
	Resistance Welders: 150 KVA.
	Finishing: Electrostatic and Conventional Wet Painting with a drying oven.
	Milling: Haas “Tool Room” Mill
	Shear: HACO ½ inch shear on a 10 ft bed with NC back gauge